Knowledgebase: SSL FAQ
How to install SSL certificate in PLESK 12 Panel ?
Posted by Administrator Support on 26 June 2015 05:16 AM

Create the CSR code for the certificate activation please follow the steps from this article


If you already have an SSL certificate issued, proceed with the installation steps below:

  1. Log in to your Plesk Panel
  2. Go to the Websites & Domains tab and select the domain you want to secure.
  3. Click on ‘Secure Your Sites’
  4. Select the SSL certificate that was created while generating the CSR code
  5. On the next page locate the Upload Certificate Files section. Click on the ‘Browse’ button and locate the certificate and the CA bundle files from your computer. After both files are chosen, click on ‘Send Files’
  6. Otherwise, you can copy and paste the certificate along with the CA bundle into the corresponding boxes under Upload the certificate as text and click on ‘Send Text’
  7. Return to the Websites & Domains tab and click on ‘Hosting settings’ next to the domain in question.
  8. On the next page locate the Security section, select the certificate from the drop-down list and make sure that ‘SSL Support’ is checked.
  9. Click ‘OK’ at the bottom of the page to save the changes.
  10. The site should be accessible via https:// from now. You can check the installation using this tool:

Comments (0)
Post a new comment
Full Name: